• Firewall - SPI
• VPN Support - Yes
• VPN Passthrough - Yes

• nv:Device Type^Wireless Router|Form Factor^Desktop|Wireless Network Standards^IEEE 802.11g|Wireless Data Transfer Rates^54 Mbps|Wireless Indoor Range^100 Meters|Wireless Outdoor Range^300 Meters|Security Protocols^WPA|Security Protocols^128-bit WEP|Security Protocols^64-bit WEP|Security Protocols^WPA-PSK|Networking Standards^IEEE 802.3 Ethernet 10Base-T|Networking Standards^IEEE 802.3u Ethernet 100Base-TX|Routing / Firewall Protoccols^TCP/IP|Routing / Firewall Protoccols^DHCP

The Linksys WRT54GL Wireless-G Broadband Router combines the functionalities of three devices into a single device, a wireless access point, a four-port full-duplex 10/100 Mbps switch and a router. The wireless access point lets you connect Wireless-G or Wireless-B devices to the network while the switch connects your wired-Ethernet devices together. The router function ties it all together by letting your whole network share a high-speed cable or DSL Internet connection. The push button setup feature makes it easy to configure your wireless devices. The router serves as a DHCP server, includes an SPI firewall to protect against Internet intruders and also supports VPN pass-through. The WRT54GL even features TKIP and AES to protect your data and privacy with up to 128-bit encryption. With the Linksys Wireless-G Broadband Router at the center of your home or office network, you can share a high-speed Internet connection, files, printers and multi-player games with flexibility, speed, security and simplicity. Status Indicators - Port status, link activity Compliant Standards - FCC IEEE 802.3, IEEE 802.3U, IEEE 802.11b, IEEE 802.11g Data Link Protocol - Ethernet, Fast Ethernet, IEEE 802.11b, IEEE 802.11g Interfaces - 1x network - Ethernet 10Base-T/100Base-TX - RJ-45 ( WAN / DMZ ), 4 x network - Ethernet 10Base-T/100Base-TX - RJ-45, 1 x network - Radio-Ethernet Dimensions - Height 4.8 cm x Depth 20 cm x Width 18.6 cm Weight - 0.5 kg

I installed openwrt on this router and I am using it as a router/firewall with iptables on it. I use multiple VLANs on my home network.

This router replaced a linux computer and my previous wireless router and does that at 15 Watts power, and no moving parts.

I really appreciate that linksys has supported the open source community with this device. Perhaps they'll do 802.11n + GigE soon.

I bought this about 10 months ago and it works great.

Pros:
+ Easy setup on Windows. Works well with Mac too.
+ I connect three laptops (two PCs, one Mac) to it and use it without hassles.
+ Good range even for a two storied house.
+ Has 4 ethernet ports. Can be used as a wired LAN hub.

Cons:
- Air vents on top gather dust :)

Highly recommended.

I have two linksys routers, one of these WRT54GL, and an older G, both running WW-DRT firmware to increase range and abilities. I have them linked using WDS and the power increased to 100mW for better range. Once setup, I haven't even had to power cycle or reset either of them, they just work. After installing WW-DRT on these routers, they pretty much have the features of a router that costs x5 more, you can't find a better deal than that.

I bought this device on the back of its reputation for reliability and flexibility and value for money. I'm completely satisfied.

Installed the Tomato firmware on Day One and haven't looked back. Very solid product.

I have two desktops which I wanted to connect to broadband modem via cat5 cable plus we intend to purchase a laptop around Christmas and we want to connect it via wireless. We also wanted to network.

There is no paper documentation but there's supposed to be a user's manual on the CD. I didn't need it so I haven't checked. Setup was very simple, just insert the CD and follow prompts.

Both desktops accessed internet immediately and speed seems the same as before. However, after running the Windows XP Home network setup wizard, neither pc could see the other on the network.

After some experimentation and searching the net for a solution, it turned out that I only needed to do two things......disable Norton 360 firewall and manually configure the router. That is, manually assign the ip addresses for both pc's.

I can't comment on the wireless capabilities yet but, having used Linksys products almost exclusively, I don't expect to have any problems. Good stuff.